J-B Weld JBW50132 PlasticWeld Syringe is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs, will bond a variety of surfaces, such as metal, composites, fiberglass and others, sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld™ combines to a tensile strength of 3900 PSI and cures to a translucent yellow colour. GREAT FOR Most Hard Plastics, ABS, Fiberglass, PVC, Glass, Vinyl, Most Composites. USE ON Automotive, Ceramic, Fiberglass, Plastic/Composite/PVC and More.

J-B Weld HighHeat Epoxy Putty is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 4000 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 450ºF and intermittent heat exposure to 500ºF.

J-B Weld SuperWel Brush-On Instant Adhesive is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces. The brush applicator (6g size) allows for even surface application. The precision tip applicator on the 20g size allows for pin point surface application.

J-B Weld SuperWeld Extreme Instant Adhesive is a specially formulated Super Glue that provides a strong, flexible bond and cures in 24 hours. SuperWeld™ Extreme has a precision tip no drip formula and is ideal for both vertical and horizontal surfaces! SuperWeld Extreme is impact resistant and has a flexible bond allowing it be great for plastics, leather, rubber, glass, metal, and more! .

J-B Weld PlasticWeld Epoxy Putty is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most major plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed drilled, carved, sanded, and painted. PlasticWeld has a 20-25 minute work life; functional cure occurs in 2-3 hours. PlasticWeld cures to an off-white color, is rated at a tensile strength of 700 PSI. Does not adhere to polyethylene, polypropylene or some other plastics.

J-B Weld PlasticBonder Syringe is a high-strength, impact-resistant automotive adhesive, filler & sealer. Ready for sanding and painting in 30 minutes Great for bumpers & grilles, dashboard & trim, body/door panels Non-flammable and does not shrink when curing Includes one single-use Static Mixer.

J-B Weld ExtremeHeat Paste is formulated to allow for repairs to iron steel and metal in high temperature environments (1000°F / 537°C). When fully cured, this metallic compound can be drilled, machined or sanded. It is great for repairing cracks, small gaps, seam connections or holes in exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters. This product is water based, non-flammable and contains no solvents or Volatile Organic Compounds (VOCs).

J-B Weld LeatherWeld Kit Vinyl and Leather Repair Kit is an easy to use DIY repair product that does not require conventional heating irons or heating tools to fix torn or cracked vinyl or leather. This ""no-heat-to-cure"" solution provides an effective repair for most vinyl and leather surfaces with cracks and minor tears less than 2 inches in length or 1/2 inch wide. The kit contains 7 air-dry repair color compounds, a grain-paper packet, backing fabric.

J-B Weld MINUTEWELD SYRINGE is a special formulated, high-strength, two-part instant setting epoxy, will set under most temperature conditions in one minute. MinuteWeld is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.

J-B Weld ultimate grey gasket maker & sealant is an RTV (Room Temperature Vulcanized) silicone gasketing material designed for use in mechanical assemblies where higher torque or closely spaced bolt profiles can lead to higher loads and cause gasket and sealing failures for average silicones. Upon curing, the silicone forms a tough, waterproof, gasket and seal on most surfaces. It will not shrink or crack, resists oil and petroleum products, resists weathering, is sensor safe, has good temperature resistance up to 260C intermittent and is great for many automotive applications.

J-B Weld Ultimate Black Gasket Maker & Sealant is an RTV (Room Temperature Vulcanized) Silicone gasketing material designed for use in mechanical assemblies where maximum petroleum and oil resistance is required. Upon curing, which occurs when the product is exposed to the moisture in air, the silicone forms a tough, waterproof, gasket and seal on most surfaces. It will not shrink or crack, resists oil and petroleum products, resists weathering, is sensor safe, has good temperature resistance up to 500 F.

J-B Weld Minute Instant Setting Epoxy Syringe has special formulated, high-strength, two-part instant setting epoxy Set under most temperature conditions in one minute Designed to adhere to multiple surfaces Can be used on ceramic, tile, glass, stone, most plastics, wood and metal Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.